international harvester 140
 | 1958 - 1979 | 1958 - 1979 |
|---|---|---|
1958 - 1979 | ||
1958 - 1979 |
|---|
Production | |
|---|---|
Manufacturer | International Harvester |
Total built | 66,290 |
Original price was $8,200 in 1979 | |
The International 140 began as the industrial version of the Farmall 140. Industrial tractors had heavier front axles and foot-operated throttles, among other options. As the Farmall and International brands were merged the differences simply became options that the buyer could order. | |
International Harvester 140 Engine | |
|---|---|
International Harvester 2.0L 4-cyl gasoline | |
Engine details ...  |
International Harvester 140 Transmission | |
|---|---|
4-speed sliding gear | |
Transmission details ...  |
International Harvester 140 Power | |
|---|---|
Engine (gross) | 28 hp
20.9 kW |
Engine (net) | 25 hp
18.6 kW |
PTO (claimed) | 21 hp
15.7 kW |
Drawbar (tested) | 21.25 hp
15.8 kW |
Belt (tested) | 23.02 hp
17.2 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two-wheel drive | |
Steering | manual worm-and-sector |
Differential mechanical contracting band brakes | |
Open operator station. | |
Photos | |
|---|---|
 | |
International Harvester 140 photos...  |
Capacity | |
|---|---|
Fuel | 11 gal
41.6 L |
Hydraulic system | 3.38 gal
12.8 L |
Hydraulics | |
|---|---|
Type | IH Touch-Control |
Capacity | 3.38 gal
12.8 L |
Total flow | 4.6 gpm
17.4 lpm |
Tractor hitch | |
|---|---|
Type | IH Fast Hitch (one-point) |
Power Take-off (PTO) | |
|---|---|
Rear PTO | transmission |
Rear PTO Type | 540 |
Dimensions & Tires | |
|---|---|
Wheelbase | 71 inches
180 cm |
Weight | 2700 to 3000 pounds |
Front tire | 5.00-15 |
Rear tire | 9.5-24 |
Full dimensions and tires ...  | |
International Harvester 140 attachments | |
|---|---|
front-end loader | |
Attachment details ...  |
140 Serial Numbers | |
|---|---|
Location: | Serial number plate on the left side of the tractor, on the clutch housing. |
1958 | 501 |
1959 | 2011 |
1960 | 8082 |
1961 | 11168 |
1962 | 16637 |
1963 | 21181 |
1964 | 25387 |
1965 | 28408 |
1966 | 31285 |
1967 | 34818 |
1968 | 37352 |
1969 | 39906 |
1970 | 42300 |
1971 | 44424 |
1972 | 46605 |
1973 | 48507 |
1974 | 50720 |
1975 | 54273 |
1976 | 57773 |
1977 | 60839 |
1978 | 63111 |
1979 | 64544 |
FAQ: How to read a serial number table. | |
Electrical | |
|---|---|
Ground | positive (6V) |
| negative (12V) |
Charging system | generator (early) |
| alternator (late) |
Battery volts | 6 (early) |
| 12 (late) |
References | |
|---|---|
 | |
Farm Loaders published in 1962, by International Harvester | |
Farm Loaders published in 1965, by International Harvester | |
Farm Loaders published in 1970, by International Harvester | |
Spring 1968 Buyer's Guide published by International Harvester | |
Spring 1969 Buyer's Guide published by International Harvester | |
Spring 1970 Buyer's Guide published by International Harvester | |
Spring 1971 Buyer's Guide published by International Harvester | |
1978 Buyer's Guide published by International Harvester | |
1979 Buyer's Guide published by International Harvester |
Recommended Products
Advertisement · Featured Tractor-Related Products
Hy-Gard Transmission & Hydraulic Oil
Genuine OEM Part Number: TY22000 An exclusive formulation, specifically designed to protect John Deere transmissions, final drives, and hydraulic systems.
Xprite 30 LED Amber Forklift Beacon Strobe Light Safety Warning Flashing Lights
★ FEATURE: This Warning Beacon Strobe Light Total of 30 High Brightness SMD 5730 LEDs with Low Polycarbonate Dome, More Clearer Vision Can Provides 360 Degrees of Coverage. Lifespan Up to 50,000 Hours. ★ PATTERN: 3 Bright Flashes With 1 Second In Between. Durable PC Lens And Better Light Quality. Low Power Consumption And Low Heat. Self-Contained LED, No External Flasher Required.
Turf-Gard SAE 10W-30 Oil TWO Quarts
4-Cycle engine oil For gas engines only SAE 10W-30 Provides maximum protection for lawn and utility equipment 946mL / 32 fl. Oz per quart - TWO quarts included
Tractor Backhoe Attachment with Mechanical Thumb
The MechMaxx BH660 backhoe is a reliable solution for a wide range of digging and excavation tasks. Designed to fit CAT I 3-point hitch tractors, it requires a minimum of 15 PTO horsepower and a tractor weight of at least 1,500 lbs. This backhoe is ideal for ditching on farms and grazing lands, digging pools, cleaning waterways, as well as assistant excavating work in construction and building roads.
* This page contains affiliate links, purchases may generate revenue for this site