caseih farmall dx22e
![]() | 2006 - 2007
DXE SeriesSub-Compact Utility tractor | 2006 - 2007 | DXE Series | Sub-Compact Utility tractor |
|---|---|---|---|---|
2006 - 2007 | ||||
DXE Series | ||||
Sub-Compact Utility tractor | ||||
2006 - 2007 | |
|---|---|
DXE Series | |
Sub-Compact Utility tractor |
Production | |
|---|---|
Manufacturer | CaseIH (a part of CNH) |
Sub-Compact Utility tractor | |
Variants | |
|---|---|
TZ22DA | similar New Holland model |
SX21 | similar Shibaura model |
CaseIH Farmall DX22E Engine | |
|---|---|
Shibaura 1.0L 3-cyl diesel | |
Fuel tank | 7.9 gal
29.9 L |
Engine details ... | |
CaseIH Farmall DX22E Transmission | |
|---|---|
hydrostatic | |
Transmission details ... |
CaseIH Farmall DX22E Power | |
|---|---|
Engine (gross) | 22 hp
16.4 kW |
PTO (claimed) | 17 hp
12.7 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Two-post fixed ROPS. |
Hydraulics | |
|---|---|
Type | open center |
Pump flow | 3.75 gpm
14.2 lpm |
Total flow | 5.5 gpm
20.8 lpm |
Steering flow | 1.85 gpm
7.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | I |
Rear lift (at 24"/610mm) | 700 lbs
317 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540 (1.375) |
Mid PTO | independent |
Mid PTO Type | 2200 |
Dimensions & Tires | |
|---|---|
Wheelbase | 55 inches
139 cm |
Weight | 1314 lbs
596 kg |
Full dimensions and tires ... | |
CaseIH Farmall DX22E attachments | |
|---|---|
54" mid-mount mower deck | |
60" mid-mount mower deck | |
snowblower | |
blade | |
front-end loader | |
Attachment details ... |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Recommended Products
Advertisement · Featured Tractor-Related Products

Turf-Gard SAE 10W-30 Oil TWO Quarts
4-Cycle engine oil For gas engines only SAE 10W-30 Provides maximum protection for lawn and utility equipment 946mL / 32 fl. Oz per quart - TWO quarts included

Tractor Backhoe Attachment with Mechanical Thumb
The MechMaxx BH660 backhoe is a reliable solution for a wide range of digging and excavation tasks. Designed to fit CAT I 3-point hitch tractors, it requires a minimum of 15 PTO horsepower and a tractor weight of at least 1,500 lbs. This backhoe is ideal for ditching on farms and grazing lands, digging pools, cleaning waterways, as well as assistant excavating work in construction and building roads.

2 Pack 3/8" Tractor Bucket Grab Hook
Grade 70 level 3/8 Grab Hook Bolt-On Mount with Backer Plate and for Installation.

M805853: Spark Plug
Trivalent metal plating provides superior anti-corrosion and anti-seizing properties Corrugated ribs prevent flashover Pure alumina silicate ceramic insulator, provides superior strength and better heat transfer Copper core aids in heat removal
* This page contains affiliate links, purchases may generate revenue for this site
