minneapolis moline g940
 | 1971 - 1973
Row-Crop tractor | 1971 - 1973 | Row-Crop tractor |
|---|---|---|---|
1971 - 1973 | |||
Row-Crop tractor | |||
1971 - 1973 | |
|---|---|
Row-Crop tractor |
Note: the Minneapolis-Moline model G940 is the same as the Oliver 1855. The following data is from the 1855 listing. |
|---|
Production | |
|---|---|
Manufacturer | Minneapolis-Moline |
Row-Crop tractor | |
Original price was $13,000 in 1975 | |
Minneapolis-Moline G940 Engines | |
|---|---|
Oliver-Waukesha 5.1L 6-cyl diesel | |
Oliver-Waukesha 5.1L 6-cyl gasoline | |
Fuel tank | 35 gal
132.5 L |
Engine details ...  | |
Minneapolis-Moline G940 Transmissions | |
|---|---|
6-speed gear | |
18-speed partial power shift | |
Transmission details ...  |
Minneapolis-Moline G940 Power | |
|---|---|
PTO (claimed) | 92 hp (gas)
68.6 kW |
| 98 hp (diesel)
73.1 kW |
Drawbar (tested) | 82.65 hp
61.6 kW |
PTO (tested) | 98.60 hp
73.5 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Power steering | |
Differential hydraulic disc brakes | |
Open operator station. Optional two-post ROPS and cab. |
Hydraulics | |
|---|---|
Type | closed center |
Pump flow | 20 gpm
75.7 lpm |
Tractor hitch | |
|---|---|
Rear Type | I/II |
| II/III (optional) |
Rear lift | 4,000 lbs
1814 kg |
| 6,000 lbs (Cat 3)
2721 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540 |
| 540/1000 |
| 1000 |
Engine RPM | 984@2400 |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 103 inches
261 cm |
4WD Wheelbase | 86.25 inches
219 cm |
Weight | 11,150 lbs
5057 kg |
Front tire | 11L-15 |
Rear tire | 23.1-34 |
Full dimensions and tires ...  | |
G940 Serial Numbers | |
|---|---|
1969 | 220-640 |
1970 | 221-099 |
1971 | 225-508 |
1972 | 231-366 |
1973 | 236-585 |
1974 | 247-436 |
1975 | 255-727 |
Final | 255-785 |
FAQ: How to read a serial number table. | |
References | |
|---|---|
 | |
Models G850/G940 published in 1971, by Minneapolis-Moline |
Recommended Products
Advertisement · Featured Tractor-Related Products
Heavy Duty Farm Work Gloves
Essential protective gear for farm work, durable and slip-resistant
Hy-Gard Transmission & Hydraulic Oil
Genuine OEM Part Number: TY22000 An exclusive formulation, specifically designed to protect John Deere transmissions, final drives, and hydraulic systems.
John Deere Original Equipment Cool-Gard II PRE-Mix
COOL-GARD II PRE-MIX, 1 GAL;3.78L. DO NOT ADD WATER. Prediluted Engine Coolant. Heavy-duty, low-silicate, high performance antifreeze/coolant. This is a OEM John Deere Part.
Tractor Backhoe Attachment with Mechanical Thumb
The MechMaxx BH660 backhoe is a reliable solution for a wide range of digging and excavation tasks. Designed to fit CAT I 3-point hitch tractors, it requires a minimum of 15 PTO horsepower and a tractor weight of at least 1,500 lbs. This backhoe is ideal for ditching on farms and grazing lands, digging pools, cleaning waterways, as well as assistant excavating work in construction and building roads.
* This page contains affiliate links, purchases may generate revenue for this site