allis chalmers d12
 | 1959 - 1968
D SeriesRow-Crop tractor | 1959 - 1968 | D Series | Row-Crop tractor |
|---|---|---|---|---|
1959 - 1968 | ||||
D Series | ||||
Row-Crop tractor | ||||
1959 - 1968 | |
|---|---|
D Series | |
Row-Crop tractor |
Production | |
|---|---|
Manufacturer | Allis Chalmers |
Row-Crop tractor | |
Built in West Allis, Wisconsin, USA | |
Original price | $3,522 (1968) |
Variants | |
|---|---|
D12 High Clearance | cultivation tractor |
D10 | single-row tractor |
Allis Chalmers D12 Engines | |
|---|---|
Allis-Chalmers 2.3L 4-cyl gasoline | |
Allis-Chalmers 2.4L 4-cyl gasoline | |
Fuel tank | 12.5 gal
47.3 L |
Engine details ...  | |
Allis Chalmers D12 Transmission | |
|---|---|
4-speed sliding gear | |
Transmission details ...  |
Allis Chalmers D12 Power | |
|---|---|
Engine | 31 hp
23.1 kW |
Drawbar (claimed) | 25.75 hp
19.2 kW |
PTO (claimed) | 30 hp
22.4 kW |
Drawbar (tested) | 29.43 hp
21.9 kW |
PTO (tested) | 33.32 hp
24.8 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two-wheel drive | |
Open operator station. |
Photos | |
|---|---|
 | |
Allis Chalmers D12 photos...  |
Hydraulics | |
|---|---|
Type | live |
Valves | 1 or 2 |
Tractor hitch | |
|---|---|
Rear Type | I |
Type | Snap-Couple |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 |
Dimensions & Tires | |
|---|---|
Wheelbase | 78.75 inches
200 cm |
Weight | 2,800 lbs
1270 kg |
Front tire | 5.00x15 |
Rear tire | 10x24 |
Full dimensions and tires ...  | |
D12 Serial Number Location | |
|---|---|
 | |
Serial number stamped into the flange where the engine and transmission meet on the left side of the tractor. |
D12 Serial Numbers | |
|---|---|
1959 | 1001 |
1960 | 1950 |
1961 | 2801 |
1962 | 3638 |
1963 | 5501 |
1964 | 6012 |
1965 | 9192 |
1966 | 9508 |
1967 | 9830 |
FAQ: How to read a serial number table. | |
Belt Pulley | |
|---|---|
RPM | 1220 |
Speed | 2556 ft/min
779.07 meters/min |
References | |
|---|---|
 | |
50 choices that tailor tractor power to your needs published in 1960, by Allis Chalmers | |
D10 D12 farm tractors published in 1961, by Allis Chalmers | |
Series II D-10 D-12 Tractors published in 1963, by Allis Chalmers | |
Series III D-10 D-12 Tractors published in 1966, by Allis Chalmers | |
D-12 Utility Tractor published in 1960, by Allis Chalmers | |
more work... less sweat published in 1962, by Allis Chalmers |
Recommended Products
Advertisement · Featured Tractor-Related Products
Turn Signal Light Kit
OEM John Deere Part Number: BUC10608 Replaces OEM Part Number: BM26588, BUC10608
Heavy Duty Pistol Grip Grease Gun Kit
🚜 Power Performance: 8000psi Max working pressure guaranteed by iron die cast head and enhanced sealing. 🚜 Ergonomic Design: Pistol grip lets you operate with one hand. Sand blasted grid surface increases friction for safety.
Tractor Backhoe Attachment with Mechanical Thumb
The MechMaxx BH660 backhoe is a reliable solution for a wide range of digging and excavation tasks. Designed to fit CAT I 3-point hitch tractors, it requires a minimum of 15 PTO horsepower and a tractor weight of at least 1,500 lbs. This backhoe is ideal for ditching on farms and grazing lands, digging pools, cleaning waterways, as well as assistant excavating work in construction and building roads.
Powtol AM125424 Oil Filter
3" O.D, 2-1/4" long, 3/4"-16 thread, 28 micron filter, 7 to 9 PSI relief, To ensure the optimal performance of your engine, please verify your engine's model and part numbers before ordering the parts.
* This page contains affiliate links, purchases may generate revenue for this site