international harvester hydro 84
 | 1978 - 1983
84 SeriesUtility tractor | 1978 - 1983 | 84 Series | Utility tractor |
|---|---|---|---|---|
1978 - 1983 | ||||
84 Series | ||||
Utility tractor | ||||
1978 - 1983 | |
|---|---|
84 Series | |
Utility tractor |
Production | |
|---|---|
Manufacturer | International Harvester |
Utility tractor | |
Built in Doncaster, England | |
Original price was $23,000 in 1984 | |
International Harvester Hydro 84 Engine | |
|---|---|
International Harvester 4.0L 4-cyl diesel | |
Engine details ...  |
International Harvester Hydro 84 Transmission | |
|---|---|
hydrostatic | |
Transmission details ...  |
International Harvester Hydro 84 Power | |
|---|---|
Drawbar (claimed) | 43.6 hp
32.5 kW |
PTO (claimed) | 58.7 hp
43.8 kW |
Drawbar (tested) | 42.90 hp
32.0 kW |
PTO (tested) | 58.73 hp
43.8 kW |
Performance test details ...  | |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Power steering | |
Independent hydraulic wet disc brakes | |
Open operator station. ROPS canopy or cab optional. |
Photos | |
|---|---|
 | |
International Harvester Hydro 84 photos...  |
Capacity | |
|---|---|
Fuel | 20 gal
75.7 L |
Hydraulic system | 16.5 gal
62.5 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 16.5 gal
62.5 L |
Valves | 1 or 2 |
Total flow | 13 gpm
49.2 lpm |
| 15.4 gpmOptOptional
58.3 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | position and draft control |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | hydraulic wet disc |
Rear PTO Type | 540 |
Dimensions & Tires | |
|---|---|
Utility Wheelbase | 88 inches
223 cm |
Row-crop Wheelbase | 84.5 inches
214 cm |
4WD Wheelbase | 85.2 inches
216 cm |
Low-profile Wheelbase | 83.75 inches
212 cm |
Weight | 5620 to 6765 pounds |
Front tire | 7.50-16 |
Rear tire | 16.9-30 |
Full dimensions and tires ...  | |
Hydro 84 Serial Numbers | |
|---|---|
Location: | Serial number plate on the right side of the frame, above the front axle. |
1978 | 501 |
1979 | 787 |
1980 | 1481 |
1981 | 5564 |
1982 | 6014 |
1983 | 8069 |
FAQ: How to read a serial number table. | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
 | |
1979 Buyer's Guide published by International Harvester | |
Buyer's Guide 1981 published by International Harvester | |
Buyer's Guide 1982 published by International Harvester | |
84 Series Hi-Performers published in 1978, by International Harvester | |
International Series 84 Utility/Row-Crop Tractors published in 1978, by International Harvester | |
International Series 84 tractors published in 1982, by International Harvester | |
International Series 84 Tractors published in 1983, by International Harvester | |
Agricultural Equipment Reference Catalog published in 1980, by International Harvester |
Recommended Products
Advertisement · Featured Tractor-Related Products
John Deere 1:16 Big Farm Tractor Model
Detailed scale model with authentic features, perfect for collectors and enthusiasts
Powtol AM125424 Oil Filter
3" O.D, 2-1/4" long, 3/4"-16 thread, 28 micron filter, 7 to 9 PSI relief, To ensure the optimal performance of your engine, please verify your engine's model and part numbers before ordering the parts.
John Deere Original Equipment Cool-Gard II PRE-Mix
COOL-GARD II PRE-MIX, 1 GAL;3.78L. DO NOT ADD WATER. Prediluted Engine Coolant. Heavy-duty, low-silicate, high performance antifreeze/coolant. This is a OEM John Deere Part.
Tractor Backhoe Attachment with Mechanical Thumb
The MechMaxx BH660 backhoe is a reliable solution for a wide range of digging and excavation tasks. Designed to fit CAT I 3-point hitch tractors, it requires a minimum of 15 PTO horsepower and a tractor weight of at least 1,500 lbs. This backhoe is ideal for ditching on farms and grazing lands, digging pools, cleaning waterways, as well as assistant excavating work in construction and building roads.
* This page contains affiliate links, purchases may generate revenue for this site