waltanna fw 280
 | 1986 - 1988
Four-wheel Drive (4WD) tractor | 1986 - 1988 | Four-wheel Drive (4WD) tractor |
|---|---|---|---|
1986 - 1988 | |||
Four-wheel Drive (4WD) tractor | |||
1986 - 1988 | |
|---|---|
Four-wheel Drive (4WD) tractor |
Production | |
|---|---|
Manufacturer | Waltanna |
Four-wheel Drive (4WD) tractor | |
Built in Tarrington, Victoria, Australia | |
Waltanna FW-280 Engine | |
|---|---|
Caterpillar 10.5L 6-cyl diesel | |
Engine details ...  |
Waltanna FW-280 Transmission | |
|---|---|
20-speed gear | |
Transmission details ...  |
Waltanna FW-280 Power | |
|---|---|
Engine | 280 hp
208.8 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Articulated power steering | |
Mechanical disc brakes | |
Cab standard with air-conditioning. |
Capacity | |
|---|---|
Fuel | 179.6 gal
679.8 L |
Hydraulic system | 19.8 gal
74.9 L |
Hydraulics | |
|---|---|
Type | closed center load sensing |
Capacity | 19.8 gal
74.9 L |
Pressure | 3000 psi
206.8 bar |
Valves | 4 |
Pump flow | 21.9 gpm
82.9 lpm |
Tractor hitch | |
|---|---|
Rear Type | III |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 135 inches
342 cm |
Weight | 24802 lbs
11250 kg |
Front tire | 18.4x38 |
Rear tire | 18.4x38 |
Full dimensions and tires ...  | |
Recommended Products
Advertisement · Featured Tractor-Related Products
John Deere Original Equipment Cool-Gard II PRE-Mix
COOL-GARD II PRE-MIX, 1 GAL;3.78L. DO NOT ADD WATER. Prediluted Engine Coolant. Heavy-duty, low-silicate, high performance antifreeze/coolant. This is a OEM John Deere Part.
Universal Tractor Hydraulic Filter Kit
High-quality filter kit for extended tractor life, compatible with multiple models
Powtol AM125424 Oil Filter
3" O.D, 2-1/4" long, 3/4"-16 thread, 28 micron filter, 7 to 9 PSI relief, To ensure the optimal performance of your engine, please verify your engine's model and part numbers before ordering the parts.
Tractor Backhoe Attachment with Mechanical Thumb
The MechMaxx BH660 backhoe is a reliable solution for a wide range of digging and excavation tasks. Designed to fit CAT I 3-point hitch tractors, it requires a minimum of 15 PTO horsepower and a tractor weight of at least 1,500 lbs. This backhoe is ideal for ditching on farms and grazing lands, digging pools, cleaning waterways, as well as assistant excavating work in construction and building roads.
* This page contains affiliate links, purchases may generate revenue for this site